"connector" Product Guide

This page lists companies with one or more products emphasizing the keyword *connector*. Click on any vendor to see a listing of related products. To see all products, click expand all.

Sort by: relevance | company
  • Concurrent Technologies, Inc.  (1)
    • AD VP2/CF1
      A transition board that attaches to the rear of the VMEbus through the P2/J2 backplane connector (+)

      Features:

      • Includes inboard CompactFlash disk site
      • USB connector
      • EIDE connector
  • TE Connectivity  (15)
    • Solder Short Tail PC/104 Connectors
      PC/104 and PC/104-Plus solder short tail connectors for use in modules where printed circuit board stacking is not required (+)

      Features:

      15530.jpg
      • Reflow soldering can install them and they do not require press-fit processing
      • Both connectors comply with the interconnection requirements defined by the PC/104 consortium
      • One-piece, 104-position connector
    • MultiGig RT
      A board-to-board connector (+)

      Features:

      • Meets Bellcore/Telcordia specifications
      • Rather than conventional pins, uses miniature printed circuit board structure on the daughter card modules and fully-enclosed dual-beam contacts on the back-lane connector
      • Both the daughter card and backplane connectors use industry standard press-fit pin technology
    • HTS heavy duty
      Module system for HTS heavy duty connectors for applications that require mixing of connections in one connector (+)

      Features:

      • Power and signal transmission can be obtained in one connector
      • Modular contact inserts are available in sizes 3, 4, 6, 8, 10, and 12
      • The fixing frame to hold the interchangeable modules for upper and lower part mates with the heavy duty connector hoods
    • CHAMP Series 1 SCA-2
      Enhanced connector for SCSI bus applications, virtually eliminating signal errors during hot swaps (+)

      Features:

      • Contains a multi-conductivity gradient on the connector contacts, in addition to a highly resistive material on the ends of the contacts, to eliminate the initial voltage transient as the connector is hot-plugged [...]
    • Vertical AMC Connector for MicroTCA
      Pressfit connector per MicroTCA.0 Specification (+)

      Features:

      45162.jpg
      • 170 lines
      • Connector designed so that custom load patterns are easily created
      • Single overmolded wafer design
    • Z-PACK 2mm HM AB Receptacle
      Designed for use with the Type AB Shroud, this hard metric connector provides maximum signal density with connector alignment and guidance when also used with type AB compatible feed-through pin headers (+)

      Features:

      • Available in two styles; RJ3, 37.9mm in length with 95 signal contacts, and the RJ5 which is 43.9mm and contains 110 signal contacts
      • Applications included those governed by the CompactPCI Computer Telephony specification, PICMG 2.5 r1.0 [...]
    • Z-PACK 2mm HM Type AB Receptacle
      Designed for use with the Type AB Shroud, this hard metric connector provides maximum signal density with connector alignment and guidance when also used with type AB compatible feed-through pin headers (+)

      Features:

      • Available in two styles; RJ3, 37.9mm in length with 95 signal contacts, and the RJ5 which is 43.9mm and contains 110 signal contacts
      • Applications include those governed by the CompactPCI Computer Telephony specification, PICMG 2.5 r1.0 [...]
    • Slim I/O Cable Connector
      High-speed long reach cable connector (+)

      Features:

      • Small Form Factor
      • Power and signal contacts in a single connector
      • Flexible signal pin assignment
    • ATCA Power Connector
      High conductivity, precision formed contacts (+)

      Features:

      20398.jpg
      • Selective plating in compliance with RoHS requirements
      • Precision formed compliant pin offers excellent retention to ensure a reliable connection [...]
    • AMC.0 Connector
      A+, B, B+, A/B, A+B+ styles (+)

      Features:

      20399.jpg
      • Targeted for high-speed differential applications (3.125 Gps to 10+Gbps)
      • Precision formed compliant pin reduces stub effect and offers retention to ensure a reliable connect
      • Suitable for assembly processes using flat rock tooling [...]
    • Multimode LC Connector Plug Kits
      Multimode LC connector plug kits (+)

      Features:

      • Connecctor kits available in both simplex and duplex, for 900µm buffered cable and 1.6 to 2.0mm, 2.4mm, and 3.0mm jacketed cable
      • Knurled crimp body for better cable retention
      • Widened thumb latch for easier unplugging [...]
    • Connector for SCSI
      A connector for SCSI bus applications that virtually eliminates signal errors during hot swaps (+)

      Features:

      2656.jpg
      • AMP adds a highly resistive material to the ends of the connector contacts
      • The high resistance eliminates the initial voltage transient as the connector is hot-plugged
      • The resistance of the contact gradually decreases, and reaches the m? range before full engagement is achieved [...]
    • MINIPAK
      High-density, board-to-board power connectors (+)

      Features:

      • Can be configured with power contacts at a pitch of 7.5, 6.0, or 4.5mm
      • Maximum of 60A per blade
      • Blind mating capabilities
    • Eurocard Connectors
      Type M Eurocard receptacle (action pin) and Type M Eurocard header [...] (+)

      Features:

    • Z-PACK MAX Connectors
      High speed +10 Gbps (+)

      Features:

      • High density: 25 pairs/cm (66 pairs/inch)
      • Four- and five-pair-per-column
      • Press-fit termination
  • One Stop Systems Inc.  (2)
    • OSS-PSBP-P47-1
      3U CompactPCI power supply backplane with P47 power connectors (+)

      Features:

      4890.jpg
      • The backplane can be ordered with either a single P47 connector for single power supply operation or with dual P47 connectors for N+1 redundancy
      • The power supply backplane contains an AC input connector, a peripheral power connector, an on/off switch on the front panel to the 2-pin connector on the rear of the backplane
      • Power lugs are provided for +5, +3.3V, +12V, -2V, and ground
    • OSS-ECA
      Free-standing adapter board that transfers the PCIe bus from a x4 cable connector to a x4 link slot with a x16 connector (+)

      Features:

      30578.jpg
      • Versatile board installs in small space
      • Supports any x4, x8, or x16 add-in card
      • ATX power connector provides 75 watts of power to the card edge connector for the add-in board
  • FCI  (11)
    • TwinMezz Mezzanine Connectors
      Board-stacking connector (+)

      Features:

      35836.jpg
      • Ultra-high density for mezzanine applications
      • Next-generation, high-speed electrical performance
      • 25 high-speed differential signal pairs in a square centimeter, or 161 signal pairs in a square inch, of board area
    • Power Card-Edge series
      A connector system that can be used for DC power output from embedded AC/DC power supplies or for power distribution between boards within an enclosure (+)

      Features:

      30776.jpg
      • The connector range includes options for right-angle, vertical, or straddle-mount solder termination
      • The connectors' low profiles are suitable for use in enterprise data or communications equipment, particularly in servers and external storage systems
      • Width of connector body is 9 mm or less, making it well-suited for use in 1U rack-mount servers or on power distribution boards inside 1U redundant power supply assemblies
    • 10046742 connector series
      x16 vertical PCI Express card edge connector with an integrated retention arm for PCI Express graphics cards (+)

      Features:

      • Flexible arm extends away from end of the connector body and includes a molded post that snaps into a notch on the bottom of the add-in card
      • Post is designed to engage with the “hockey stick” shaped hook defined on the bottom of the graphics card
      • Removal of a graphics card is facilitated by pushing the flexible arm away from the graphics card until the molded post disengages from the notch on the bottom of the card
    • 1.25mm wire-to-board connector system
      1.25mm wire-to-board connector system that is designed for a wide range of demanding applications such as industrial control, automotive telematics, security systems and more [...] (+)

      Features:

      47723.jpg
    • HM2R67PA5108N9
      2mm HM bckpanel interconnection system [...] (+)

      Features:

    • HM2R71PA5108N9
      2 mm HM backpanel Interconnection system [...] (+)

      Features:

    • HM2R70PA5108N9
      2 mm HM backpanel interconnection system [...] (+)

      Features:

    • HM2R66PA5108N9
      2 mm HM backpanel interconnection system [...] (+)

      Features:

    • AirMax VS ATCA connector
      150 position Coplanar connectors (+)

      Features:

      • 10 insert molded leadframe assembly (IMLA) columns provide five differential signal pairs
      • As all signal lines and IMLAs are isolated from each other by air, interleaving shields are not required and insertion loss and crosstalk are minimized
      • Within the dimensional constraints of AdvancedTCA Zone 3, up to four connectors can be placed side by side to provide a total of 200 high speed differential signal pairs [...]
    • Airmax VS coplanar receptacle for zone 3
      High pin density per module (+)

      Features:

      22011.jpg
      • Flexible
      • Allows for multiple column spacings and custom pin assignment including power
      • Scaleable
    • Sofix Connector
      Metric cable connector for signal transmissions in telecom or industrial applications (+)

      Features:

      • (PN: 10074494-231LF)
      • RoHS-compliant
      • 72 position I/O solution with 2 mm spacing range
  • Extreme Engineering Solutions (X-ES)  (1)
    • XIt1000
      6U transition module (+)

      Features:

      • Supports breakout of 2 PICMG 2.16 10/100/1000 Mbps Ethernet ports
      • 40-pin IDE connector
      • 44-pin Laptop IDE connector
  • GE Intelligent Platforms, Inc.  (2)
    • VMIACC-0559
      6U CompactPCI Rear Transition Utility board mounts in the rear transition area of the backplane providing access to the serial, parallel, EIDE, and floppy disk connectors by way of the J3 connector (+)

      Features:

      • The CompactPCI J3 connector carries all signals from the 6U front mount CPUs through the backplane to the VMIACC-0559 J3 connector
      • IDE and floppy peripherals can be accessed by onboard headers or rear panel connectors
      • Provides one DB25 parallel port connector, two RJ45 serial port connectors, two EIDE 40-pin connectors, two 34-pin floppy disk drive connectors
    • VMIACC-0561
      A P2 SCSI transition board (+)

      Features:

      • Routes ultra/fast/wide SCSI-2 bus on VMIC's VMIVME-7696 VMEbus P2 connector to a standard SCSI connector
      • Provides one 68-pin Ultra-SCSI-2 connector
      • Attaches to the rear of the VMEbus P2/J2 backplane connector [...]
  • HARTING  (5)
    • 1611 170 5202 000 (AdvancedMC Backplane Connector for µTCA)
      The HARTING AdvancedMC backplane connector for MicroTCA systems is designed to support data transmission speeds of up to 12.5 Gbps (+)

      Features:

      33373.jpg
      • The connector is terminated with rugged press-fit technology and meets MicroTCA.0 shock and vibration requirements
      • HARTING AdvancedMC connectors feature con:card+ technology
      • con:card+ is the new quality seal that identifies connectors providing the highest level of mating reliability for AdvancedMC modules. con:card+ connectors feature unique GuideSpring technology that pushes and holds the AdvancedMC module against the connector housing
    • Mini Coax
      A high-density multicoaxial connector system that provides more than twice the number of contacts in the same board space as typical SMA or DIN 41612/IEC60603-2 connector styles (+)

      Features:

      • Available in six, eight, or 10-contact modules
      • Board-to-board press-fit and SMC/SMT connectors and harnessing available [...]
    • DIN 416 12 Type M Flat
      A DIN 41612 female connector (+)

      Features:

      15590.jpg
      • Press-in process where signal and high-current contacts are pressed in at the same time
      • Power contacts can withstand high-current applications up to 40A at 20ºC
      • Mateable with the standard type M male connector according to DIN 41612/IEC 60603-2 and is UL and CSA approved [...]
    • VME 64x accessories
      A complete series of VME64x connector accessories for the 160 poles system: (+)

      Features:

      • seven different shrouds for different PCB thicknesses
      • Shell housing
      • Locking lever
    • AMC press-fit connector for AdvancedTCA
      B+ type AdvancedMC connector for AdvancedTCA with press-fit technology (+)

      Features:

      • Designed to meet the mechanical and electrical requirements of PICMG AMC.0 but with a press-in interface
      • Inclusion of the press-in option is scheduled for the next revision of the AMC.0 specification
      • Supports the high data transmission rates and low crosstalk required by the AdvancedMC specification
  • ERNI Electronics, Inc.  (4)
    • ERmet Power Module
      Used in conjunction with the ERmet 2mm HM & ERmet ZD high speed differential pair connector system – Compatible with DIN 41612 line of connectors also - 12mm wide, right angle male connector provides up to 3 power contacts (9 amps each) available in 3 heights – 10mm wide, female connector eliminates any possibility of shorting power pins – Connector designed to meet the IEC 950 finger probe safety requirements – Ideal for telecom & instrumentation applications. (+)

      Features:

      • [...]
    • AdvancedTCA Connectors
      ERmet ZD selected for backplane interconnect for PICMG 3.X AdvancedTCA industry standard (+)

      Features:

      • Use as high speed connector within the Data Transport Connector Zone 2 with up to 5 ZD connectors
      • Designed for high speed differential signaling at data rates of 5 Gbps and beyond
      • Robust mechanical design and excellent signal integrity
    • Monoblock
      CompactPCI monoblock that combines a shortened Type B connector and a Type A connector together with an integrated polarization coding area that makes 220 signaling contacts available (+)

      Features:

      • The polarization coding is also integrated [...]
    • ERNI ATCA Power Connector
      This connector meets all PICMG 3.0 performance requirements and is fully intermateable with alternative connectors, which were designed according to the same standard (+)

      Features:

      32156.jpg
      • Stamped female contacts with high conductive material for highest current carrying capacity
      • Reliable and proven pressfit zone
      • Standard flat rock press-in tools
  • Electro Standards  (1)
    • 6008 Fiber Cassette
      Model 6008 is a high density, pre-terminated Fiber Optic Cassette that breaks out 1 MTP 8 strand fiber cable into 8 ST Military Style connectors (+)

      Features:

      41248.jpg
      • The MTP connector is an 8 strand single mode angle polish connector
      • Each ST connector is a single strand singlemode Military Style connector
      • This system offers the advantages of saving duct space and installation time and the ruggedness of Military Style connectors
  • EMAC, Inc.  (1)
    • PCM-3835 IDE to CompactFlash Module
      IDE to CompactFlash adapter (+)

      Features:

      • 100% IDE compatible
      • Power & Drive Activity LEDs
      • Three methods of power entry: standard 4-pin power input, PC/104 connector, 2.5" HDD power input
  • Meritec  (4)
    • MERITEC's Direct Attach Angled 4X (with Latc
      Angled cable assembly based on direct attach methodology (+)

      Features:

      • Signal wires in the cable are attached directly to the connector's contacts, eliminating the need for an interstitial printed circuit board and avoiding undesirable effects that PCBs may have on the signal integrity at higher data rates
      • Available in either latching or thumbscrew retention connector designs compatible with the mating board connectors from various manufacturers
      • RoHS compliant [...]
    • 25º 5V/32 Bit Connector
      A PCI connector (+)

      Features:

      • Allows a 32-bit daughtercard to mate at a 25º angle to the printed circuit board [...]
    • Right Angle 3.3V and 5V/32 and 64 Bit Connector
      A PCI connector (+)

      Features:

      • Allows low-profile, right angle stacking heights while allowing horizontal PCI card mounting [...]
    • 2x25 Right Angle Card Edge Connector
      A PCI connector (+)

      Features:

      • Provides horizontal, 50 position card edge mounting and an extra slot of data expansion from the PCB when designing unique bus architecture
      • Designed for companion use with the 3.3V and 5V/64-bit PCI connectors [...]
  • Teradyne - Connection Systems  (2)
    • VHDM RAM
      An 8-row, right-angle male connector (+)

      Features:

      • 100 signals per inch density
      • Allows designers to grow their system horizontally by creating traditional backplane components in a right-angle orientation
      • Can be combined with power and guidance wafers to achieve an overall connector length of up to 304mm
    • VHDM L-Series
      An open pin field version of the VHDM connector (+)

      Features:

      • Utilizes teh same organizing stiffener as the VHDM
      • Any combination of VHDM, VHDM-HSD, and VHDM L-Series targets can be co-located on the same connector to accomodate a mix of high and low-speed connections
      • Fully compatible with all VHDM components
  • MAC Panel  (1)
    • Series 120
      The Series 120 Interface System is ideal for your VXI applications (+)

      Features:

      5738.jpg
      • The connector modules are designed on 1.2” centers, providing a 1 to 1 match with VXI instruments
      • Series 120 products are available in Hinge-Down or Pull-Thru configurations
      • The Hinge-Down system allows test probing to be done at the front of the instrument or at the pins located within the interface receiver
  • Amphenol Industrial  (1)
    • Traction Motor Power Connector TMPC
      Traction Motor Power Connector (TMPC) includes a color-coded power mounting flange with built-in locking keys to prevent the contact cable from slipping during use. (+)

      Features:

      185278086711755069.jpg
      • Ideal for power distribution equipment and traction motor supply applications
      • Utilizing patented RADSOK technology, the TMPC allows for higher amperage, lower T-rise and insertion/removal forces than any other connector on the market.
      • The thermoplastic molded panel mounting flanges on the connectors have four mounting holes that allow users to bolt the connector directly to an aluminum or stainless steel panel. [...]
  • Az-Com  (2)
    • 9900-28-05
      A CompactPCI 3U Mini Extender designed to protect connector on the CompactPCI backplane from the damage due to repeated insertion of tested CompactPCI boards (+)

      Features:

      • Requires CompactPCI 3U Connector Saver (P/N 9900-08-05) as replaceable top connector assembly
      • Combination of CompactPCI Mini Extender and CompactPCI Connector Saver raises tested card 2.35 inches [...]
    • 9900-08-05
      3U M-M Connector Saver is primarily a throw-away connector saver for the CompactPCI electronic, passive and mini extender (+)

      Features:

      9674.jpg
      • Replace the connector saver when it shows wear rather than replacing a whole extender
      • To prevent pulling out Connector Saver when tested card is removed use a tie-down assembly [...]
  • Molex, Inc.  (5)
    • EMI Adapter
      Allows for a common panel mounting hole and internal SC connector to be mated with an SC, ST, or FC connector on the opposite side (+)

      Features:

      29792.jpg
      • Suitable for for routers, servers, and other telecommunications equipment, as well as storage servers, labs, and test equipment
      • Easy-to-remove alignment sleeve that offers quick access to clean the internally mated connector without disconnecting it from the adapter and without entering the enclosure, providing a safe and fast method to ensure proper optical performance
      • Available preconfigured or as individual components [...]
    • MicroTCA Connector
      Press-fit 10 Gbps edge card connector for MicroTCA backplanes (+)

      Features:

      32236.jpg
      • Press-fit for ease of assembly and repair
      • Stitched contact design is amenable to high-speed connector assembly, reducing cost and offering high capacity
      • Connector and footprint design optimized for 10 Gbps performance
    • AMC B+ Connector
      Press-fit 10 Gbps Advanced Mezzanine B+ connector for AdvancedTCA carrier boards and blade servers (+)

      Features:

      31479.jpg
      • Press-fit 10 Gbps Advanced Mezzanine B+ connector for AdvancedTCA carrier boards and blade servers
      • Electrically tuned for 10 Gbps performance
      • Insert molded "chicklet" design provides excellent electrical performance
    • MTP-CPI
      MT-ferrule-based interconnect designed specifically for coplanar applications (+)

      Features:

      29791.jpg
      • Available in rear-mount and side-mount styles
      • Intended to meet the dimensional requirements of the AdvancedTCA Zone 3, connector specifications
      • Allows front cards to be replaced without disrupting cable at the rear of the chassis
    • Edge Connector
      Meets MicroTCA requirements (+)

      Features:

      36011.jpg
      • Easy press-fit termination
      • Cost effective terminal design
      • Excellent high speed differential performance
  • AEWIN Technologies Co., Ltd.  (1)
    • EM-7302
      Embedded onboard or socket Intel Pentium M/Celeron M embedded SBC with PC/104, LVDS, LAN, audio, and SSD (+)

      Features:

      • One DDR SODIMM memory socket up to 1 GB
      • One 10/100 Mbps Ethernet interface
      • Four serial ports, one parallel port
  • EPT, Inc. USA  (5)
    • 308-52200-41
      Velox High-speed Backplane Connector 8-left FEATURES: •10 Gbps •Rugged design •Tested in accordance to VITA 46 •Durability rated to 200 cycles •Heavy gold plating •Backplane connector with “pinless� interface •Modular connector system •Insulator material LCP [...] (+)

      Features:

    • hm 2.0 hard metric AB19, AB22, and AB25 modules
      The AB modules available in high performance female versions (+)

      Features:

      • The AB19 and AB22 females compliment the long tail B22 and B19 connectors and AB shrouds for CompactPCI, Hot Swap, and Telephony backplanes
      • These modules prevent connector misalignment when mating rear I/O cards [...]
    • hm 2.0 hard metric A-47 female connector modules
      Combination of the Type A and B22 CompactPCI females for J1+J2 and J4+J5 into a single 47-row connector (+)

      Features:

      • This one-piece design allows the customer to specify one part, which is inserted into the PCB in a single insertion operation, for faster product assembly [...]
    • Type M DIN
      Type M DIN connector Compact PCI applications (+)

      Features:

      • These connectors are offered with compliant pin design for fast flat rock pressfit insertion onto the backplane
      • Pre-assembled pressfit power contacts are also available [...]
    • AdvancedMC Connector
      12.5 Gbps (+)

      Features:

      • Press-fit connector
      • Card edge technology
      • Processing by flat-rock press-fit technology with pre-alignment (optional)
  • Advanced Interconnections Corp.  (1)
    • Surface-Mount PGA Connector
      Surface-mount PGA connector technology, which enables development of custom board-to-board connector system (+)

      Features:

      14961.jpg
      • Application of AIC's BGA Socket Adapter System in an existing, molded PGA wafer, resulting in a surface-mount, interstitial pin grid array (PGA) connector
      • Enables test boards to be produced with fewer layers due to SMT design
      • Eliminated the need for plated through-holes
  • Amphenol Corporation  (1)
    • GTC-M Connectors
      A series of rear-release connectors (+)

      Features:

      15793.jpg
      • Reverse bayonet style connector that incorporates hard dielectric inserts, rear insertion/rear release contacts, silicone grommets and interfacial seals, as well as metal clip contact retention
      • The metal clips used in the insert provide positive contact retention to levels equal to the MIL-C-5015 series (MS345X)
      • Forward movement of the connector's contacts is prohibited by a solid positive stop in the cavity of the connector
  • F9 Systems, Inc.  (1)
    • F9 Systems Tx/Rx SignalBlade
      AdvancedTCA compatible design using the HM-ZD backplane connector (+)

      Features:

      20406.jpg
      • Provides four (4) Transmit and four (4) Receive pairs to test a complete AdvancedTCA channel
      • Edge-launch SMAs for superior bandwidth and ease of test cable attachment
      • Flexible connector alignment (because connector guides are removed), allows all signals to be easily probed
  • Creative Electronic Systems  (1)
    • VMDIS 8005
      6U VME64x A16:D16 with 5-row VME connector (+)

      Features:

      • 1 red and 7 tri-color LED indicators for runtime environment
      • 8-digit alphanumeric display
      • Connector for 16 TTL input signals
  • WIN Enterprises Inc.  (2)
    • IP-06037
      GX1 300 MHz low power processor (+)

      Features:

      20368.jpg
      • Supports CRT and 18-bit TFT panels
      • 32-bit PCI-bus
      • 10/100Base-T Ethernet interface
    • IP-06017
      AMD GX1 300 MHz low-power processor (+)

      Features:

      20370.jpg
      • 10/100Base-T Ethernet port
      • FDD Connector
      • IDE HDD connector
  • PXIT  (6)
    • PX2000-005
      A termination panel (+)

      Features:

      • 37-pin D type to screw terminal connector [...]
    • PX2000-004
      A termination panel (+)

      Features:

      • 250V/2A 37-pin D type to screw terminal connector [...]
    • PX2000-003
      A multicore cable assembly (+)

      Features:

      • PX2000 series 200-pin connector to four 68-pin connectors
      • Connects to termination board PX2000-006 (four required) [...]
    • PX2000-006
      A termination board (+)

      Features:

      • PX2000 termination board
      • 68-pin to screw terminal connector [...]
    • PX2000-002
      A high-density multicore cable assembly (+)

      Features:

      • PX2000 series 62-pin D connector to two 37-pin D type connectors
      • Connects to termination board PX2000-006 (four required) [...]
    • PX2000-010
      A high-density multicore "Y" cable assembly (+)

      Features:

      • PX2000 series 96-pin connector to two standard 68-pin SCSI headers
      • Can be used to connect the PX2000-106 to two terminal boards [...]
  • Technobox, Inc.  (2)
    • 2316
      An 8-port RS422 Async communication adapter (+)

      Features:

      • Provides eight 16550-based UARTs using RS422 signaling levels
      • Each port provides two differential inputs and two differential outputs
      • Each differential pair is terminated by a 150Ω parallel resistor located on the PMC card
    • 2238
      A 16-port RS232 Async communication adapter (+)

      Features:

      • Provides 16 16550-based UARTs using RS232 signaling levels
      • Each port provides a functional subset of the full set of data and modem control lines configured for DTE operation
      • All 16 ports are available out of the PMC front panel via a 68-pin SCSI-style connector
  • Zendex  (1)
    • ZXE-ICB/104
      A PC/104 connector card (+)

      Features:

      14997.jpg
      • Provides single board computers with common connector interfaces
      • Includes: Ethernet, CRT video, two USB, 40-pin IDE, and 44-pin IDE connectors
      • CompactFlash socket
  • Positronic Industries  (9)
    • Combination Thermocouple Contact
      High reliability thermocouple contacts for standard and high-density D-subminiature as well as circular connector products (+)

      Features:

      31420.jpg
      • For use in Positronic's popular CBD series connectors
      • Type K, T, and E thermocouple contacts can be mixed with signal, power, coax, and high voltage contacts in a single connector package
      • Crimp and PCB board mount terminations [...]
    • PICMG 2.11 Compact Power Connector, P47
      Backplane or power supply connectors designed specifically for systems like CompactPCI where commonly used interconnects fall short of demanding power requirements (+)

      Features:

      4100.jpg
      • Three-level sequential mating for hot swapping and AC/DC operation within a single connector
      • Five package sizes are available for 1U through 6U applications
      • AC or DC input
    • Modular Connector
      New GG Series (+)

      Features:

      39189.jpg
      • Modular power connector
      • Lots of current through a small space at a reasonable price
      • 256 possible contact variations
    • GG Series
      Modular power connector provides 256 possible contact variations (+)

      Features:

      • GG Series tooling is modular
      • Molding inserts are available for size 20, 16, 12, and 0 contacts
      • Up to four inserts can be placed into the tool to produce a one-piece finished connector
    • Sumo High Power
      A power connector (+)

      Features:

      14784.jpg
      • A drop-in replacement for the top drawer connector
      • Offered in cable, straight PCB, and right angle PCB terminations
      • Can be selectively loaded
    • VP Series
      A connector that provides a dedicated interface for dual-redundant power-input and hardware-management circuits (+)

      Features:

      14498.jpg
      • Supports live insertion and extraction requirements of cards and modules used in the latest technology computing platforms
      • Eight power contact
      • 26 signal contacts
    • Environmental D-sub
      D-Subminiature connectors are a popular choice for a wide variety of applications (+)

      Features:

      46572.jpg
      • Environmental D-subminiature connectors are available for applications requiring sealing to IP67
      • One-piece Unibody connector insert eliminates need for secondary sealing processes
      • Standard and high density options
    • Environmental WD Series
      Complete line of D-sub connectors with dust and water protection to IP67 (+)

      Features:

      17726.jpg
      • Environmental WD series has been improved by providing a new “unibody” design which eliminates the need for adding sealants as a secondary manufacturing operation
      • Allows for rapid manufacturing of the connector, reduces cost, and improves overall performance by overcoming concerns about differences in coefficients of expansion of dissimilar materials [...]
    • Power Connector
      High power density (+)

      Features:

      35851.jpg
      • Low contact resistance - 0.0007 ohms
      • Five package sizes, multitude of power/signal contact variants
      • Variety of terminations including crimp contact panel mount and AC pass through
  • Kontron  (1)
    • VIA-1002
      Bus converter and adapter converts the PCI connector used on both the PCI-104A+ bus and the PC/104-Plus bus to a PCI cardedge connector (+)

      Features:

      • Uses a vertical cardedge connector, allowing the backplane style PCI adapters to be mounted perpendicular to the VNS-686 single board computer or PC/104-Plus stack [...]
  • Vox Technologies  (1)
    • VTC28396
      Universal expansion module (+)

      Features:

      22313.jpg
      • PC/104 breadboard
      • For custom user interface circuits
      • Stack through PC/104 connector
  • Woodhead  (1)
    • IP67 Ethernet Multi-Port Interconnection System
      An industrial Ethernet connector that merges a standard RJ-45 connector and a rugged outer shell with IP67 environmental sealing (+)

      Features:

      32226.jpg
      • Shielded and unshielded applications supported [...]
  • Samtec  (1)
    • QMSS/QFSS Series
      A shielded connector system (+)

      Features:

      • Provides EMI suppression by incorporating shield plates along the sides of the connector and terminating them to the PCB via selected signal pins
      • Both single-ended and differential-pair versions are available as standard; applications-specific options with other signal/ground configurations are also available
      • Signal pins on .025" (0,635mm) pitch; available with 52, 104, 156, and 208 total pins per connector set
  • Amphenol Aerospace  (1)
    • VITA 66.1
      VITA 66.1 MT connector (+)

      Features:

      • Reliable high speed connection for the most extreme commercial and military environments
      • Among the highest density of connector products on the market providing up to 24 fiber optic channels per ferrule and 48 optic channels per connector [...]
  • AVX Corporation  (3)
    • Series 8074
      Type L vertical male feed-to for backplanes (+)

      Features:

      • 6 power or coax contact cavities
      • Center cavity with prealignment guides and keying option
      • Supplied with locating pegs for secure P.C. board mounting
    • Series 8483/8485
      Style M DIN Eurocard power connector with 7 power contacts, 24 signal contacts, designed for CompactPCI 3U and 6U boards [...] (+)

      Features:

    • Series 8075
      Type M vertical male feed-to for backplanes (+)

      Features:

      • 3 power contact cavities
      • 55 signal contacts
      • Center cavity with prealignment guides and keying option
  • Perlos Connectors  (1)
    • PerForm 2.0 Series
      Series of common connectors as well as shrouds, coding keys, and ground return shields (+)

      Features:

      • Male connectors have three-level sequential mating for both the front and rear side and 15 standard contact pins
      • Connector Type A, 110 signal contacts, 22 columns
      • Type B, 110 signal contacts, 22 columns
  • Oupiin  (13)
    • 9111-7-1-N
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type N
      • 30% glass filled PBT UL94V-0 housing [...]
    • 9111-7-1-L
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type L
      • 30% glass filled PBT UL94V-0 housing [...]
    • 9111-7-2-N
      A 2.00 Hard Metric connector (+)

      Features:

      • Female right angle, type N
      • 30% glass filled PBT UL94V-0 housing [...]
    • 9111-7-2-L
      A 2.00 Hard Metric connector (+)

      Features:

      • Female right angle, type L
      • 30% glass filled PBT UL94V-0 housing [...]
    • 9111-7-1-C
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type C
      • Operates at –55º C to 105º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-1-D
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type D
      • Operates at –55º C to 105º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-1-M
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type M
      • Operates at –65º C to 125º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-1-B22
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type B-22
      • Operates at –55º C to 105º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-1-B25
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type B-25
      • Operates at –55º C to 105º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-1-B19
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type B-19
      • Operates at –55º C to 105º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-1-A
      A 2.00 Hard Metric connector (+)

      Features:

      • Male type A
      • Operates at –55º C to 105º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-2-M
      A 2.00 Hard Metric connector (+)

      Features:

      • Female right angle, type M
      • Operates at –65º C to 125º C
      • 30% glass filled PBT UL94V-0 housing
    • 9111-7-2-A
      A 2.00 Hard Metric connector (+)

      Features:

      • Female right angle, type A
      • Operates at –65º C to 125º C
      • 30% glass filled PBT UL94V-0 housing